DECK LIFTERDeck Lifter
A Deck Lifter is a large load-lifting machine that uses jack mechanisms that extend and retract with hydraulic cylinders and a deck to raise a load.
Even work that involves very large and super-heavy structures such as bridge replacement can be done safely and in a short time in a relatively small work area with the use of multi-axle carriers.
Features
-
The structure is strong against lateral loads due to the use of box-shaped jacks with excellent rigidity.
-
An inverter control system is used to control the speed of the electric motor that powers the hydraulic pump, so it has excellent synchronism and fine movement.
-
Two units of lifters can be used stacking one unit on another. In this way, the lifting stroke is doubled.
-
It is equipped with a safety system that constantly monitors the amount of extension and retraction and automatically stops operation before the lifter becomes unstable even if synchronism is lost. The amount of extension and retraction and other various information can be checked on the display monitor to support the operator.
Line Up
TD-1502/2002
- Lifting capacity
- 150 t/200 t
- Stroke
- 2,100 mm
- Deck dimensions
- 6,680mm Γ 3,200mm
TD-2702
- Lifting capacity
- 270 t
- Stroke
- 2,100 mm
- Deck dimensions
- 5,300mm Γ 2,400mm
- * Lifting capacity is the maximum weight that can be lifted when the center of gravity of the load is in the center of the deck.
- *Please contact us for price and delivery time as we will design according to your request.
Customer Story
Here are some of the usage examples.
-
Combined with multi-axle carriers, land transportation of ultra-long elevated girders is now possible.
-
The cut-and-removed overpass had to be carried away underneath the adjacent overpass. By fully retracting the deck lifter, the overall height could be reduced, allowing the overpass to pass through while still loaded on the carrier vehicle.
-
By stacking two deck lifters and doubling the stroke, it is also useful for work that requires height.
